October 10, 2024

Backet Hat

Just another WordPress site

Victony WA305 Wifi Extender Setup

Victony WA305 Extender Setup

Victony WA305 Extender Setup

The Victony WA305 Extender Setup tutorial will assist you in connecting your booster to your main router or modem. Victony repeater extends your existing wifi signal or wifi network, allowing you to enjoy uninterrupted gaming, movies, and web series. The WA305 comes with four exterior antennae, giving you unrivalled wifi range throughout your house and business. It’s a plug-and-play device that connects to any router in 15 seconds.You can configure the Victony WIFI Range Extender in three modes: router, repeater, and access point. However keep in mind that when you change modes, you must also reset or reconfigure your Ap.setup.

Victony WA305 Wi-Fi Extender Setup Using a Web Browser

  • Then, connect your WA305 to a power source.
  • Wait a few seconds and examine the LED light to determine if it is stable or solid green.
  • Connect your laptop, PC, or mobile device to the Victony WA305 extender setup network.
  • After you’ve connected, launch any online browser, such as Google Chrome, Mozilla Firefox, or Microsoft Edge.
  • And then type 192.168.10.1 into the address bar at the top of your browser to bring up a login page.
  • Enter “admin” as your username and password.
  • Connect your Victony repeater to your existing wireless network by following the on-screen directions.

Victony WA305 extender Setup using WPS method?

Here are some steps for victony wa305 extender setup via the wps method. Follow them:

  • Plug your Victony WA305 wifi range extender into an electrical outlet to get started.
  • Wait until the LED light turns firm.
  • Then, on your WA305 wireless repeater, push the WPS button.
  • Next do the same with your main modem or router.
  • You will now notice that the lights on both devices are flickering, and they will stop blinking in 15-20 seconds.
  • If your booster is successfully linked to your existing wifi network, all solid LED lights on your Victony will illuminate.
  • Unplug your new extender and plug it in wherever you want to use it.

Note: Keep in mind that your Victony range extender and router/modem should be 3-5 feet apart.

Firmware update for Victony WA305 wifi extender

Follow the simple procedures below to upgrade the Victony WA305 extender firmware:

  • Download the most recent firmware file from the company’s official website.
  • Enter your extender username and password on the ap.setup website.
  • Go to System Tools.
  • Choose Firmware Update.
  • Click on upgrade and navigate to the firmware file you downloaded.
  • Restart the extender after the upgrade. Good, your extender firmware has been successfully upgraded.

Common issues for Victony WA305 extender Setup

  1. Troubleshooting connection issues: If you cannot connect to the WiFi extender or your device is not receiving a signal, try rebooting both the router and the extender. Additionally, try moving the extender closer to the router and make sure the antennas are properly aligned.
  2. Range Issues: If you are having difficulty with the range of the extender, try relocating it to a higher, more open space, away from large metal objects or appliances that can interfere with the signal. 
  3. Slow speeds: If your connection is slow, try rebooting the router and extender, and make sure your device is connected to the correct network. Additionally, check for any interference from other wireless devices and make sure your router is updated to the latest firmware.

Troubleshooting steps for Victony WA305 wifi extender setup 

Here are some steps for victony wa305 extender setup:

  1. Place the extender in an appropriate location: Place the Victony WA305 range extender in a location that is halfway between your router and the area you want to cover. 
  2. Connect the extender to power: Plug the extender into a power outlet and make sure the power LED light is on. 
  3. Connect the extender to your router: Connect an Ethernet cable from your router to the extender. 
  4. Access the extender’s web interface: Open a web browser and type in the extender’s IP address. The default IP address is 192.168.1.254. 
  5. Log in to the extender’s web interface: Enter the default username and password.The default login and password are “admin.”
  6. Set up a wireless network name: Create a new wireless network name (SSID) and wireless security key (password). 
  7. Save your settings: Click the “Save” button to save your settings.
  8. Connect your devices to the extender: Connect your devices to the new wireless network you created. 
  9. Test the connection: Test the connection to make sure your devices are connected to the wireless network and the signal is strong.

How can I reset my Victony WA305 extender?

To reset your Victony WA305 extender to its factory default settings, follow the steps below:

  1. Locate the reset button on the device. It is usually a small hole marked “RESET.”
  2. Using a paper clip or a small pointed object, press and hold the reset button for about 10 seconds until the Power LED on the device turns off and then back on again.
  3. Release the reset button after the Power LED turns back on.
  4. Wait for the device to reboot and restore the factory default settings.This procedure could take up to one minute.

Once the device has been reset, you will need to reconfigure it to your network settings.

 If you face any problem regarding victony wa305 extender setup you may feel free to contact us or live chat with us via our official website.