Why is Choosing the Right Block Machine Pallet Critical for Your Factory?

When you run a brick factory, your block machine pallet acts as the foundation for every single product you make. If you use a weak PVC pallet, your bricks might crack or come out uneven. This guide explains how to choose the best material for your block machine pallet to save money and reduce waste. We will look at how Linyi Rhinos Pallet Co.Ltd provides solutions that help factories stay productive and efficient.

What Exactly is a Block Machine Pallet?

Think of a block machine pallet as a sturdy tray. It sits under the brick machine. The machine drops wet concrete onto it. The pallet then vibrates at high speeds to shape the brick. After that, it carries the heavy, wet bricks into a curing room.

If the pallet bends, the bricks bend too. If the pallet breaks, your production line stops. This is why the material you choose matters so much. You need something that can handle heat, moisture, and heavy pressure every single day.

Meet the Expert: Linyi Rhinos Pallet Co.Ltd

Linyi Rhinos Pallet Co.Ltd is a leading manufacturer specializing in high-quality pallets for the construction industry. They focus on durability and precision to help brick makers succeed. You can find their full range of products at https://gmt-pallet.com/.

Understanding the PVC Pallet

For many years, the PVC pallet was the standard choice. It is made from polyvinyl chloride plastic. These pallets are solid and heavy. They provide a very smooth surface for the bricks.

Many factory owners like them because they are easy to clean. They also resist chemicals well. But they have some specific traits you should know about before buying.

The Benefits of Using PVC

• They have a very long life if handled correctly.

• The surface is flat and smooth for perfect brick bottoms.

• They do not absorb water or swell up like wood.

• They are resistant to the chemicals found in concrete.

The Downsides to Consider

• They are very heavy to move by hand.

• High temperatures can make them soft or cause them to warp.

• They can become brittle and crack in extremely cold weather.

• The initial cost is often higher than other materials.

Comparing PVC to the New Standard: GMT Pallets

While the PVC pallet is a traditional choice, many are switching to GMT (Glass Mat Thermoplastic) pallets. This is where Linyi Rhinos Pallet Co.Ltd excels. Their GMT pallets use high-strength glass fiber mixed with plastic resin.

This mixture creates a pallet that is lighter than a PVC pallet but much stronger. It handles the vibration of the block machine much better. It also stays flat even when the curing room gets very hot.

Key Differences in Performance

Weight and Handling

A PVC pallet is dense. It puts a lot of strain on your machine’s motors. A GMT pallet is about 20% lighter. This means your machine uses less power to move the pallets. It also means less wear and tear on your conveyor belts.

Temperature Resistance

Bricks need to cure in warm, moist rooms. A PVC pallet might start to sag at 70 degrees Celsius. This ruins the shape of your bricks. GMT pallets can handle over 100 degrees Celsius without losing their shape. This makes them much more reliable in tropical climates or heated curing sheds.

Impact Strength

In a busy factory, pallets get dropped. They get hit by forklifts. A PVC pallet can shatter if it gets hit hard, especially in winter. GMT pallets are reinforced with glass fibers. These fibers act like a skeleton. They absorb the shock and prevent the plastic from cracking.

Why Longevity Matters for Your Budget

You might want to buy the cheapest pallet available. But that often costs more in the long run. If a block machine pallet lasts only two years, you have to stop production to replace it.

Linyi Rhinos Pallet Co.Ltd designs their pallets to last six to ten years. When you spread the cost over a decade, the “expensive” pallet becomes the cheapest option. You save money on shipping, labor, and replacement parts.

Tips for Maintaining Your Pallets

1. Keep the surfaces clean of old concrete buildup.

2. Stack them neatly to avoid unnecessary bending.

3. Check for sharp edges that might damage your machine.

4. Do not leave them in direct sunlight for months when not in use.

5. Ensure your forklift drivers are trained to handle them gently.

Real-World Example: The Small Factory Owner

Imagine a factory in a cold region. They used a standard PVC pallet for three years. In the winter, they noticed 10% of their pallets were cracking. This happened because the plastic became too stiff in the cold.

They switched to GMT pallets from Linyi Rhinos Pallet Co.Ltd. The glass fiber reinforcement kept the pallets flexible enough to survive the cold. Their waste dropped to almost zero. This change paid for itself in just six months.

The Verdict: Which One Should You Buy?

If you run a small operation with very low heat, a PVC pallet might work for you. They provide a great finish for pavers and decorative stones.

However, if you want high-speed production, the GMT block machine pallet is the winner. It is lighter, tougher, and handles heat much better. It is the modern choice for a reason. Most large-scale factories are making the switch to improve their bottom line.

Final Thoughts

Your pallet is not just a piece of plastic. It is a tool. Choosing the right tool makes your work easier and your products better. Look at your local climate and your machine’s speed before you decide.

On page 42 of the industry handbook, experts note that pallet quality is the most ignored factor in brick strength. Don’t make that mistake.